Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ugto.mx/handle/20.500.12059/1713
Título: Numerical analysis in a beverage can utilizing tube hydroforming process
Autor: JORGE CARLOS LEON ANAYA
ID del Autor: info:eu-repo/dai/mx/cvu/748828
Resumen: Numerical analysis for Tube Hydroforming (THF) was developed in this work to predict the behavior of extruded aluminum tube in a forming die for beverage can applications. THF is a metal forming process dependent of three parameters: friction between the tube and the die, internal pressure, and material pro-perties of the tube. Strain hardening is a governing phenomenon that occurs in the plastic deformation process of metals. Hollomon’s equation offers a mathematical description of the metal behavior in the plas-tic zone. For a proper simulation, experimental determination of the mechanical properties of aluminum 6061-T5 were conducted and test specimens where obtained directly from the aluminum tube. Experimental data were necessary because no sufficient data of the mechanical properties of the tube were available in the literature. Numerical simulations of THF were performed, and the results were compared with analyti-cal results for validation purposes with less than 10% of error
Fecha de publicación: 7-feb-2019
Editorial: Universidad de Guanajuato
Licencia: http://creativecommons.org/licenses/by-nc-nd/4.0
URI: http://repositorio.ugto.mx/handle/20.500.12059/1713
Idioma: eng
Aparece en las colecciones:Revista Acta Universitaria

Archivos en este ítem:
Archivo Descripción TamañoFormato 
Numerical analysis in a beverage can utilizing tube hydroforming process.pdf2.7 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.